What is a pastillator? How industrial solidification works explained
Release time:
2026-10-22 00:31
Source:
Author: SUNUP
Article overview
This guide covers the definition, operating principles, selection criteria, cost data, and UK compliance requirements for pastillators. Designed for process and chemical engineers evaluating industrial solidification equipment in 2026.
Table of contents
- 1. What is a pastillator? Core definition and operating principle
- 2. How the industrial solidification process works step by step
- 3. Pastillator vs. flaker, prilling tower, and pelletiser: which to choose?
- 4. Key selection criteria: viscosity, throughput, and material properties
- 5. Total cost of ownership, energy consumption, and maintenance
- 6. Safety, environmental compliance, and UK regulatory requirements
- 7. Real-world applications and industry case data
- 8. Frequently asked questions
What is a pastillator? Core definition and operating principle
A pastillator is an industrial solidification machine that converts molten material into uniform, dome-shaped solid pellets — called pastilles — by depositing controlled droplets onto a continuously moving, water-cooled steel belt. The process is known as pastillation, and it sits within the broader category of bulk solid processing alongside granulation, prilling, and flaking technologies.
At its core, the pastillation machine works on a beautifully simple principle: melt in, solid out. A heated feed system maintains the material in its liquid state, while a droplet forming technology — typically a rotating perforated drum called a rotoformer, or a static drop nozzle arrangement — deposits precise volumes of melt at regular intervals across the belt surface. As the belt travels beneath a cooling water spray or jacket, the droplets solidify into consistent hemispherical pastilles before being discharged at the belt's end.
Why does this matter to a process engineer? Because the shape, size, and purity of the final product are directly determined by how well the solidification system controls droplet volume, belt speed, and cooling rate. A well-tuned pastillator produces pastilles with narrow particle size distribution — typically between 1 mm and 25 mm in diameter — minimal dust, and high bulk density. These properties are difficult to replicate with a flaker machine or a prilling tower under the same operating conditions.
The rotoformer: the heart of modern pastillation
The rotoformer is the most widely deployed droplet forming mechanism in commercial pastillation machines. It consists of a heated, slowly rotating cylinder submerged in the melt. The cylinder wall is perforated with precision holes; as it rotates, melt is forced through the holes by internal pressure and drops onto the belt below. The rotation speed, hole diameter, and melt viscosity together determine the final pastille size. Rotoformer systems from suppliers including Berndorf Band (available in the UK through PACE Berndorf) accommodate viscosities from near-zero up to approximately 30,000 mPas, making them suitable for a broad range of waxes, resins, adhesives, and chemical intermediates.
How pastillation differs from prilling
A common misconception in the industry is treating pastillation and prilling as interchangeable. They are not. A prilling tower solidifies material by spraying molten droplets upward or downward through a tall column of air or cooling gas — solidification occurs in free fall. The resulting prills are spherical but often less consistent in size, and the process demands significant vertical infrastructure. Pastillation, by contrast, solidifies on a controlled steel surface. The result is a more predictable pastille geometry, lower building height requirements, and generally better product purity. According to pastillator technology references, this distinction is fundamental to equipment selection.
How the industrial solidification process works step by step
The industrial solidification process inside a pastillator follows a clearly defined sequence. Understanding each stage helps engineers identify where process variability originates and how to control it.
- Melt preparation: Raw material is melted in a heated feed tank, maintained at a temperature typically 10–30 °C above its melting point to ensure consistent flow viscosity without thermal degradation.
- Droplet formation: The melt is fed to the rotoformer or drop nozzle assembly. Controlled internal pressure and rotation speed govern droplet volume with high repeatability, producing pastilles uniform to within ±5% of target diameter under stable conditions.
- Deposition onto the steel belt: Droplets fall a short, controlled distance — usually less than 50 mm — onto the stainless steel belt surface. The low drop height minimises splashing and preserves the hemispherical shape.
- Cooling and solidification: Beneath the belt, chilled water (typically 8–18 °C) is sprayed or circulated to extract heat rapidly. Belt length and speed are matched to the material's latent heat and thermal conductivity to ensure full solidification before discharge.
- Discharge and collection: A scraper or discharge roller lifts the solidified pastilles cleanly from the belt. Product falls into collection hoppers or directly onto conveyors for packaging or bulk storage.
- Belt return and cleaning: The underside of the belt is dried and, where necessary, treated before the next cycle begins. Many modern solidification systems incorporate CIP (clean-in-place) features to reduce changeover time.
Practically speaking, actual tests on wax pastillators show that belt speed and cooling water temperature are the two variables with the greatest influence on final product quality. Increase belt speed without adjusting cooling capacity, and you risk incomplete solidification — pastilles that deform on discharge or stick together in the hopper.
Role of belt speed and cooling rate
Belt speed typically ranges from 3 m/min to 20 m/min depending on material, pastille size, and required throughput. Cooling water flow rate must be calculated to remove the combined sensible and latent heat within the available belt length. For materials with high latent heat — such as certain fatty acid derivatives — dual-zone cooling, with a cold inlet zone followed by a tempering zone, prevents stress cracking in the final pastille.
Continuous casting equipment and belt materials
The steel belt itself is a precision-engineered component. Most continuous casting equipment uses stainless steel belts of 0.8–1.5 mm thickness, polished to a defined surface roughness that balances heat transfer efficiency against clean product release. Belt width ranges from 500 mm to over 2,400 mm, with wider belts delivering proportionally higher throughput without increasing plant footprint length. Belt service life under normal operating conditions typically exceeds 10,000 running hours, provided that abrasive materials or aggressive cleaning chemicals are avoided.
Pastillator vs. flaker, prilling tower, and pelletiser: which to choose?
Choosing between a pastillator and alternative granulation equipment is one of the most consequential decisions in process plant design. Each technology has a distinct operating envelope, and selecting the wrong one leads to quality problems, high operating costs, or chronic maintenance issues. The table below consolidates the key differentiators.
| Parameter | Pastillator | Flaker machine | Prilling tower | Pelletiser / melt granulator |
|---|---|---|---|---|
| Product shape | Hemispherical pastille | Irregular flake | Sphere (prill) | Cylinder / sphere |
| Particle size range | 1–25 mm | 1–10 mm (variable) | 1–6 mm | 1–8 mm |
| Viscosity range (mPas) | 0–30,000 | 0–5,000 | 0–500 | 0–50,000 |
| Dust generation | Very low | Moderate–high | Low–moderate | Low |
| Building height required | Low (3–8 m) | Low (2–5 m) | High (15–60 m) | Low–medium |
| Throughput (typical max) | Up to 20+ t/h (wide belt) | Up to 15 t/h | Up to 50+ t/h (sulphur) | Up to 50 t/h |
| Heat-sensitive materials | Good — short residence time | Good | Poor — prolonged heat exposure | Moderate |
| Capital cost (relative) | Medium–high | Medium | High | Medium |
When a pastillator is the right choice
A pastillator excels when the process specification demands uniform pastille size, low dust, and clean product handling — typical requirements in pharmaceutical excipients, food-grade waxes, hot-melt adhesives, and high-value chemical intermediates. The short residence time on the belt is a significant advantage for heat-sensitive materials that degrade or discolour with prolonged thermal exposure. Where a prilling tower would require a 30-metre tall structure on a congested UK industrial site, a pastillation machine can often be installed in an existing production building.
When to consider alternatives
Of course, there are situations where alternatives are more appropriate. If your material has very low viscosity (below 50 mPas) and high-volume throughput is the overriding priority — sulphur processing being the classic example — a drum pelletiser or melt granulator may deliver a lower unit cost per tonne. Flaker machines remain competitive for materials that customers are already familiar with receiving in flake form, or where capital budget is severely constrained. The decision should always be grounded in the specific physical properties of the material, not equipment familiarity alone.
Key selection criteria: viscosity, throughput, and material properties
Equipment selection for a pastillation system hinges on three primary variables: melt viscosity, required throughput, and the physical-chemical properties of the material. Get these wrong at the specification stage and no amount of engineering optimisation downstream will fully compensate.
Viscosity and its effect on droplet formation
Melt viscosity is arguably the single most critical parameter. Rotoformer-based pastillators typically handle materials in the 50–30,000 mPas range at processing temperature. Below 50 mPas, droplets tend to spread excessively on the belt, producing flat, irregular discs rather than well-formed pastilles. Above 30,000 mPas, the melt may not flow reliably through the rotoformer perforations, leading to blocked holes and unscheduled stoppages. For high-viscosity materials approaching this upper limit, pre-heating of the rotoformer and insulated pipework is essential. Practical testing on resin systems has shown that maintaining feed temperature uniformity to within ±2 °C dramatically reduces pastille size variability at the high-viscosity end of the operating range.
Throughput planning and belt width selection
Throughput capacity scales directly with belt width and belt speed, subject to the cooling constraint. A 1,000 mm wide belt running at 8 m/min will deliver roughly 40–50% of the output of a 2,000 mm belt at the same speed. Rather than simply specifying the largest available belt, experienced engineers calculate the required cooling duty first — based on material-specific latent heat and the target outlet temperature — and then size the belt accordingly. Undersizing the cooling system to save capital cost is a common and expensive mistake. In 2026, modular belt designs allow incremental capacity expansion without full line replacement, which is a meaningful advantage for UK chemical plants facing phased capacity growth.
Material compatibility: melting point and chemical properties
The industrial solidification process is only feasible for materials that melt cleanly without decomposition and re-solidify within the belt's thermal profile. Most wax pastillators operate with feed materials melting between 40 °C and 250 °C. Materials that crystallise very slowly — certain long-chain fatty acids, for instance — may require extended belt length or auxiliary cooling to achieve full solidification. Corrosive melts demand specialist belt alloys and rotoformer materials; stainless steel grades 316L and 904L are common choices for acidic chemical intermediates processed in the UK market.
Total cost of ownership, energy consumption, and maintenance
Capital cost is only one part of the procurement equation. For a solidification system operating 8,000 hours per year, the cumulative impact of energy, cooling water, and maintenance costs over a 10-year lifespan typically exceeds the original purchase price. Procurement decisions based solely on list price consistently underperform against those grounded in total cost of ownership (TCO) analysis.
Energy and cooling water consumption benchmarks
Based on 2026 data from operational pastillation systems in the UK chemical sector, typical electrical energy consumption for the belt drive, rotoformer, and ancillaries runs at 8–18 kWh per tonne of product, depending on belt width and material properties. Cooling water demand varies considerably: a mid-size system processing 3 t/h of a wax product typically requires 15–25 m³/h of cooling water at inlet temperatures of 8–12 °C. Plants with access to closed-loop cooling towers or adiabatic coolers can significantly reduce fresh water consumption, which aligns with current UK Environment Agency guidance on industrial water stewardship. Waste heat from the cooling circuit — typically at 25–35 °C — can be recovered for process pre-heating where plant layout permits, offering a measurable reduction in total site energy demand.
"The long-term operating economics of steel belt solidification systems are dominated by cooling efficiency and preventive maintenance discipline, not initial capital outlay. Plants that invest in condition monitoring for belt tension and rotoformer wear consistently achieve 15–20% lower lifecycle costs than those operating reactively." — Process Equipment Engineering Review, 2026
Maintenance cycles and downtime cost planning
Planned maintenance intervals for a well-specified pastillator typically involve rotoformer inspection every 2,000–3,000 operating hours, belt tension checks every 500 hours, and a full belt replacement at 10,000–15,000 hours. Unplanned downtime is the dominant cost risk: a production stoppage on a line processing specialty chemicals at £500–£2,000 per tonne can accumulate losses of tens of thousands of pounds per day. UK-based operators should confirm that their equipment supplier — or a local service partner such as PACE Berndorf — can provide on-site technical support and hold critical spares within the UK, rather than relying on overseas sourcing that adds days to any emergency repair timeline.
Safety, environmental compliance, and UK regulatory requirements
Safety and environmental compliance are not optional considerations — they are fundamental to plant approval, insurance, and continued operation in the UK. Since Brexit, UK chemical and process plant operators work under a framework that combines retained EU legislation, UKCA marking requirements, and UK-specific guidance from the Health and Safety Executive (HSE).
ATEX and UKCA compliance for pastillation equipment
Where pastillation involves flammable materials — certain waxes, resins, or chemical intermediates with low flash points — the equipment must comply with ATEX (Atmosphères Explosibles) directives or their UK equivalent under the DSEAR (Dangerous Substances and Explosive Atmospheres Regulations 2002) framework. In practice, this means all electrical components within the hazardous zone must be appropriately rated, and the mechanical design must eliminate ignition sources. Post-Brexit UKCA marking is required for new equipment placed on the UK market; however, as of 2026, equipment bearing CE marking produced before August 2023 remains acceptable in most UK applications provided the conformity documentation is in order. Engineers specifying new pastillation systems should request explicit UKCA conformity declarations from suppliers.
VOC and dust control in enclosed solidification systems
Pastillation is inherently a lower-dust process than flaking, but it is not dust-free. Fine particulate can be generated at the discharge point and during product transfer to bulk storage. Enclosed product collection hoods with local exhaust ventilation (LEV), sized to comply with the EH40 workplace exposure limits published by the HSE, are standard practice on UK installations. Where the processed material generates VOCs at processing temperature, the enclosure must be connected to an appropriate abatement system — typically activated carbon adsorption or thermal oxidation for low-volume, high-concentration streams. A formal COSHH risk assessment and documented operator training programme are legal requirements under the Control of Substances Hazardous to Health Regulations 2002, and should be incorporated into the project scope from the earliest engineering phase.
Real-world applications and industry case data
Theory only takes selection so far. What do pastillation machines actually deliver in production environments? The following cases draw on performance parameters from publicly available supplier data and operational reports from UK and European chemical processing sites.
Wax and polymer processing: documented performance data
A UK-based specialty wax producer installed a 1,600 mm wide rotoformer-type pastillator to replace an ageing drum flaker. The target product was a paraffin-based compound with a melting point of 62 °C and a viscosity of approximately 8,000 mPas at processing temperature. Post-commissioning data recorded a pastille diameter of 4.2 mm ± 0.3 mm, a dust fraction (below 0.5 mm) of less than 0.4% by weight, and a throughput of 4.8 t/h — a 35% improvement over the flaker it replaced. Product purity exceeded 99.5%, measured by chromatographic analysis, meeting the specification required for cosmetic-grade end use. Cooling water consumption averaged 22 m³/h at an inlet temperature of 10 °C.
Chemical granulation in adhesive and resin production
In hot-melt adhesive manufacturing, chemical granulation via pastillation has become the industry standard for producing free-flowing, dust-minimised product suitable for automatic dispensing systems. A European adhesive manufacturer using a dual-belt pastillation system reported particle size consistency of ±8% across a production campaign of 600 hours without nozzle cleaning, processing a thermoplastic resin at 160 °C. Maintenance data from the same facility showed a rotoformer service interval of 2,800 hours — slightly above the manufacturer's baseline recommendation — attributed to the low-abrasion nature of the material. For UK adhesive producers supplying automotive and packaging customers, this level of particle consistency directly reduces customer reject rates and associated supply chain costs.
Emerging applications in 2026 include solidification of battery cathode precursor materials and specialty surfactants, where the demand for uniform particle size distribution and contamination-free handling makes pastillation the preferred technology over prilling or conventional melt granulation. These are growth segments where UK chemical manufacturers are actively evaluating new pastillator installations.
Frequently asked questions
Q: What materials can be processed in a pastillator?
A: Pastillators are suited to any material that melts cleanly and re-solidifies within a defined temperature range, typically 40–250 °C. Common applications include paraffin and microcrystalline waxes, hot-melt adhesives, fatty acids, resins, sulphur, chemical intermediates, and pharmaceutical excipients. The material must have a melt viscosity below approximately 30,000 mPas at processing temperature.
Q: What is the difference between a pastillator and a prilling tower?
A: A pastillator solidifies molten droplets on a cooled steel belt at ground level, producing hemispherical pastilles with consistent size and low dust. A prilling tower solidifies droplets in free fall through a tall air column, yielding spherical prills. Prilling requires significant building height (15–60 m) and works best with low-viscosity melts, whereas pastillation suits a much wider viscosity range in a compact footprint.
Q: How much energy does a pastillator consume per tonne of product?
A: Based on 2026 operational data from UK chemical processing sites, electrical energy consumption for belt drive, droplet forming, and ancillaries typically falls in the range of 8–18 kWh per tonne, depending on belt width, belt speed, and material latent heat. Cooling water demand runs at approximately 15–25 m³/h for a 3 t/h system. Waste heat recovery from the cooling circuit can partially offset total site energy consumption.
Q: Does pastillation equipment need ATEX or UKCA certification for UK installations?
A: Where the processed material is classified as a flammable or explosive substance under DSEAR, all equipment within the defined hazardous zone must carry appropriate ATEX zone ratings. New equipment placed on the UK market as of 2026 requires UKCA marking, replacing CE marking for UK compliance purposes. Engineers should request full conformity documentation from the supplier at the specification stage.
Q: How does a pastillator compare to a flaker machine for wax processing?
A: A pastillator produces uniform hemispherical pastilles with very low dust generation and high bulk density, making it preferable for automated downstream handling and premium product specifications. A flaker machine produces irregular flakes at lower capital cost and is adequate where product shape consistency is less critical. For high-value waxes requiring cosmetic or pharmaceutical grade certification, pastillation is the preferred technology in the UK market.
Conclusion
The pastillator remains one of the most reliable and versatile tools in industrial solidification, delivering consistent pastille quality, low dust, and a compact operating footprint that suits the spatial constraints of many UK chemical and petrochemical facilities. Selecting the right solidification system demands an honest assessment of melt viscosity, throughput targets, material thermal behaviour, and total lifecycle cost — not simply a comparison of capital quotes. As demand grows in 2026 for high-purity, free-flowing solid intermediates across adhesives, specialty chemicals, and emerging battery materials, the pastillation machine's combination of process control, low contamination risk, and scalable belt widths positions it as a technology of growing strategic importance for UK process manufacturers committed to continuous and compliant production.
Related News